The BedRug Custom Truck Bed Mat item # BMH17RBS is black. It does have some gray fibers sewn in which lightens the color up some. This mat is confirmed to fit a 2021 Honda Ridgeline. view full answer...
I am showing that the BedRug Custom Truck Bed Mat - Bed Floor Cover # BMQ17SBS is a confirmed fit for the 2020 Ford F-350 with the 6-3/4' bed. Per your request, here are the dimensions of this truck bed mat: 80" long, 64-1/8" wide at the back, and 49-5/8" wide at the front. I also attached a helpful diagram to illustrate these dimensions. view full answer...
The BedRug Custom Truck Bed Mat item # BMH17RBS weighs only 8 lbs. It comes in two separate pieces so it is pretty easy to maneuver. This mat is 3/4" thick and confirmed to fit a 2021 Honda Ridgeline. view full answer...
Yes, the Black Armour Heavy-Duty Custom Truck Bed Mat - Rubber - Black # BA34AR is exactly what you're looking for to fit the bed of your 2022 GMC Sierra 3500 with an 8' bed. view full answer...
The Westin Custom Fit Truck Bed Mat # 50-6145 referenced in your question weighs 52 pounds. This custom mat will fit your 2019 Chevy Silverado 2500 perfectly as long as you have the 6-1/2 foot bed.
If you happen to have the 8 foot bed you will want the Westin # 50-6165. view full answer...
The length of the Access Custom Truck Bed Mat - Snap-In Bed Floor Cover # A25030179 at wheel wells of your 2019 Nissan Frontier is 33-1/4 inches. With the Access cover, I confirmed that there could be some trimming required at the corners of the mat with your sprayed-in liner. As far as the BedRug Custom Truck Bed Mat # BMN05CCD, I measured that in-house and it is 42 inches between the wheel wells and 56-3/4 inches at the widest section. With these two different fitments, I recommend the... view full answer...
Yes it is. The Black Armour Heavy-Duty Custom Truck Bed Mat item # BA67AR does come in two parts. This mat is confirmed to fit the 8' bed length of the 2022 Ford F-250.
We do have a one piece option for a custom fit rubber bed liner for your truck. It is the DeeZee item # DZ87012. This one is slightly thinner at 3/8" over the 1/2" for the Black Armour. view full answer...
The Dee Zee Custom-Fit Truck Bed Mat # DZ65CR is designed for short bed GMC and Chevy trucks, so it will be approximately 6ft-9" long. This mat can be trimmed of any excess as well, using a heavy duty utility knife. view full answer...
Yes! The DeeZee Custom-Fit Truck Bed Mat # DZ87006 is a great option for your 2018 Ford F-150 with a 6-1/2' bed. Just be sure that you place the pallet on top and don't slide it forward. If you have to slide a heavy load forward then it will likely move the mat with it.
This is made of extra-thick, high-strength Nyracord which is 3/8" thick and gives it superior protection against cracking, rusting, and breaking even in very hot and very cold temperatures. The mat is made in the USA and... view full answer...
Yes, the rebate is currently available 12/10/23. It is at the top of the BedRug Custom Truck Bed Mat item # BMH17RBS product page. You'll just want to click on the link and following the instructions. The promo runs through the end of the year. view full answer...
The combined weight of both pieces of the BedRug Custom Truck Bed Mat - Bed Floor Cover for Trucks with Bare Beds or Spray-In Liners # BMH17RBS is about 8 pounds. With this information, one of the things you can do is find something that weighs 8 pounds (with using a scale) and place it on your 2020 Honda Ridgeline's trunk to test it. view full answer...
On the DeeZee Custom-Fit Truck Bed Mat # DZ86985 the width at the narrower center portion is 48-inches. The width at the widest part is approximately 64-1/2-inches. The overall length is 66-inches. view full answer...
The Husky Liners Custom Fit Truck Bed Mat # HL94FR is 1/4" thick heavy duty polypropylene and weighs roughly 42-lbs, so it's not going to move around in wind. In fact, the mat has some raised ribs on the bottom side to allow air to flow through it and keep moisture from getting trapped. view full answer...
I would be happy to help you. Let me start by confirming that the B&W Companion OEM 5th Wheel Hitch w/ Slider for Chevy/GMC Towing Prep Package item # BWRVK3775 will fit the puck system on your 2022 GMC Sierra 3500. You will be able to use a 1/4" thick bed mat underneath the hitch so long as you cut out where the hitch mounts in your factory pucks.
I have linked a picture below that will show you how little clearance there is between the bottom of the slider base and the bed of your Sierra.... view full answer...
I spoke to the manufacturer about the BedRug Custom Truck Tailgate Mat # BMT19TG and they didn't have the dimensions to give me and could only tell me that it's designed to fit the follow year/make/models:
2019 - 2023 Ram 1500 5-1/2 Foot Bed with RamBox
2019 - 2023 Ram 1500 5-1/2 Foot Bed without RamBox
2019 - 2023 Ram 1500 6-1/2 Foot Bed with RamBox
2019 - 2023 Ram 1500 6-1/2 Foot Bed without RamBox view full answer...
Go To Results